Electric fuel pump, you can improve engine performance. oxygen sensor we are a professional manufacturer and supplier in China. Here you can find high-quality The fuel line, you need to properly prepared, to prevent spills and leaks. A simple wiring error, such as reversing the positive and negative wire, you can create an immediate and devastating fire. This type of changes should be considered to this point, only by an experienced mechanic. The installation is not long, only need the basic tools of the machinery.
Wear safety glasses. Red with a wrench, and then set them aside where they can not contact any metal battery positive lead to disconnect the black negative.

Find the carburetor bolted, which is the engine intake manifold, an air filter installed. Make sure the feed from the tank to the carburetor fuel line. A catch pan placed in the fuel line to connect and disconnect the fuel line from the tank to the carburetor with a screwdriver, loosen the clamp feeding.

3 Find the mark on the electric fuel pump connection. "Connection" with a screwdriver, to ensure that the hose clamp to connect the fuel pump from the tank fuel line. delphi fuel pump fuel pump from other connections (labeled "out") with a screwdriver, to ensure that the short section of hose clamp carburetor, fuel line connections.

4 to find the fuel pump wire. Determine the line (most likely red), and run it close to the battery to install the fuse panel. To determine the fuel pump (the most possible black) negative line and run on the metal parts of vehicles installed vehicle ground terminal board, usually the firewall and the battery is very close to.

5 determined by the vacancy on the car ignition control fuse panel 30 amps power supply terminal. It line line spade clip into. To find a vacancy on the ground with a ground terminal and inserted into the spade clips provided with the negative wire line.

6 Check all fuel line comfort and placed correctly. electric fuel pump make sure all electrical connections properly protected and fully seated. Negative black lead batteries, and then re-red lead.